Operating and Maintenance Manual
Recuperators
Content
- Health and Safety
- Cautionary Notes
- Delivery
- Off Loading Handling & Erection
- Installation
- Commissioning and Testing
- Maintenance
of equipment
held in storage conditions
for a period of up to 2 years - Fan section
- Fan Maintenance
- Electric Motors
- Drive Belts
- Belt Tensioning Instructions
- Electric Air Heater Batteries
- Heating and Cooling Coils
- Recuperators
- Dampers
- Air Filters
- Maintenance Schedule
- Invalidation of Guarantee
Maintenance
Recuperator units have no moving parts,
hence mechanical maintenance is unnecessary. When dealing with dusty
and polluted air, filters should be regularly checked and replaced when
necessary. It is possible to clean the unit with compressed air (in
case of dust deposit) or by spraying it with a detergent solution in
case of any greasy deposits.
In order to remove greasy deposits, a water-detergent solution such as DECADE, ND-150 CHEM ZYME, PRIMASEPT,POLY-DET, oakite 86m or similar should be used, following the manufacturers instructions. Strongly alkaline or any products that may be aggressive to aluminium should be avoided.